Blue Screen of Death error codes and solutions.

0x000000ED - UNMOUNTABLE_BOOT_VOLUME:

Problem might be because of boot.ini corruption or caused by a damaged Hard Disk. To fix this error, one must run an hardware diagnosis and see if there's a hard disk failure. If not hard disk needs to be replaced.

0x00000024 - NTFS_FILE_SYSTEM:

Hard Disk Drive going bad.  Same as above, run a hardware diagnosis and see if that fixes the issue. If not, contact the manufacturer if this BSOD happens more than twice.

0x0000007A - KERNEL_DATA_INPAGE_ERROR:

Possible memory issue. The RAM is experiencing an issue. A hardware diagnosis on memory needs to be run to identify the issue.

0x0000007B - INACCESSIBLE_BOOT_DEVICE:

Windows cannot finda  boot device, typically after loading Windows files, the hard disk cannot continue due to corruptions in the HDD.

0x0000000A - IRQL_NOT_LESS_OR_EQUAL:

Sometimes caused by third party softwares, also caused by inserting new hardware that is not compatible with your computer. Most of these peoples occur when your Windows installs a driver that is not compatible with your hardware/software. First try uninstalling the software and if that doesn't help, try removing the hardware and then go to safe mode and uinstall the software.

0x0000007E - SYSTEM_THREAD_EXCEPTION _NOT_HANDLED

Sometimes caused by third party softwares, also caused by inserting new hardware that is not compatible with your computer. Most of these peoples occur when your Windows installs a driver that is not compatible with your hardware/software. First try uninstalling the software and if that doesn't help, try removing the hardware and then go to safe mode and uinstall the software.

0x0000008E - KERNEL_MODE_EXCEPTION_NOT_HANDLED

Sometimes caused by third party softwares, also caused by inserting new hardware that is not compatible with your computer. Most of these peoples occur when your Windows installs a driver that is not compatible with your hardware/software. First try uninstalling the software and if that doesn't help, try removing the hardware and then go to safe mode and uinstall the software.

0xC0000218 - UNKNOWN_HARD_ERROR:

Many reasons, can be caused by hardware issues on RAM, Video Card and/or Hard Disk Drive. Running a diagnosis will narrow the issue down.

0x00000050 - PAGE_FAULT_IN_NONPAGED_AREA:

corrupted RAM, caused basically because the RAM memory has been corrupted. Diagnosis will surely answer the inquiry.

0x0000004E - PFN_LIST_CORRUPT:

Same as above, except this message is direct. RAM has gone bad and needs replacement or diagnosis.

0x000000EA - THREAD_STUCK_IN_DEVICE_DRIVER:

Caused by video card driver or possible corrupted video card. Download the latest driver from manufacturers.

Was this Article helpful?  122    101 

Related Article

 How to rename Software Distribution and fix Windows update issues.